Troubleshooting
This section describes some problems you may encounter and gives suggestions on
how to resolve the problem.
If you need more assistance, contact TI-Cares.
TI-Python Adapter Troubleshooting
My adapter isn't working at all. What happened?
In the worst case, the adapter is unable to properly run distribution software. When
this happens, the "green" power LED may not be lighted, even though the adapter
itself has power. In this case, the following steps are needed:
1. Connect your TI-Python Adapter to your calculator.
2. Launch the PyAdaptr application
3. Within 5 seconds of launching the application (and not seeing the green LED
lighted), double-tap the reset button on the back of the TI-Python adapter.
4. If the green LED illuminates, and is slowly pulsing in intensity, the TI-Python
adapter boot loader utility is running. The PyAdaptr application should install a
distribution firmware image at this time.
5. Let the installation run all the way through to completion. The TI-Python adapter
should restart in normal operation mode, sync your files, and let you continue with
a now working TI-Python adapter.
Troubleshooting
4
