FAQ’s
•
To break a continuous loop program on the calculator and software (common when using
“while True:”
when following coding examples on the micro:bit Make it: code it website ).
o
Press [F12] on PC.
o
Press and hold [fn] while then also pressing [f5] on Mac.
o
Calc
ulator: press and hold the “on” key.
o
To avoid this we suggest to instead use
while get_key !=”esc”:
▪
while get_key != “esc”:
is found under the Commands menu in the BBC micro:bit
module men selections.
•
If you have difficulty dragging-dropping the hex file, instead use the micro:bit Python IDE to flash the
https://python.microbit.org/v/2.0
•
If you run into any problems:
o
Problems installing the .tns module file or flashing the hex file, contact TI-Cares Customer
Support:
https://education.ti.com/en/customer-support/support-worldwide
o
Troubleshooting issues, coding and other topics, contact the TI STEM Team:
