Software Overview
19
SLOU453A – September 2016 – Revised October 2017
Copyright © 2016–2017, Texas Instruments Incorporated
TAS6424-Q1 Evaluation Module
A set of I2C commands can be loaded and executed from this window. On the top right corner, click on
“I/O” button to display the above window. Write I2C commands here or open an existing *.cfg file then
click “Execute” button on the bottom left corner. The I2C commands are sent to the device when the
“Execute” button is pressed.
Figure 21. I2C Window – Sending I2C Commands