TAS5766MRMTEVM Setup
2
TAS5766MRMTEVM Setup
This section describes the TAS5766MRMTEVM setup and software installation. Since PPCMB connects
to one of the device under test (DUT) EVMs, it is necessary to show the connection in this section. The
TAS5766MRMTEVM is used for this purpose.
2.1
TAS5766MRMTEVM Setup
shows the EVM with the parts labeled.
Figure 3. PPCMB and TAS5766MRMTEVM Connection
Hardware requirements:
•
Desktop or laptop PC running either Windows XP or Windows 7
•
Power supply 7–26 VDC
•
Speakers and cable
•
A USB micro type B cable
•
Audio source: This can be a DVD player with the appropriate SPDIF cable or Windows Media Player
from Windows XP or Windows 7
Setup procedure:
•
Plug in the USB cable from the PC to the PPCMB; the USB Lock LED (blue) is illuminated
•
Connect the PPCMB to the TAS5766MRMTEVM
•
Connect the PSU to TAS5766MRMTEVM and turn on the power. 5-V and 3.3-V LEDs are illuminated.
•
If an optical SPDIF source is used, the blue SPDIF clock-locked LED is illuminated
•
Disregard the orange LED indicating the energy threshold (ET) level is exceeded. Clearing the ET
value turns the orange LED off.
4
TAS5766MRMTEVM
SLOU387 – June 2014
Copyright © 2014, Texas Instruments Incorporated
