Using the GUI Software
15
SLOU481A – August 2017 – Revised October 2017
Copyright © 2017, Texas Instruments Incorporated
TAS5755MEVM Evaluation Module
Figure 19. DRC Time Constants Window
3.6
Using the Mixer and Scaler Nodes
shows a snap shot of the different mixer and scaler blocks from the GUI. The mixer nodes can
be used to mix the contents of the different channels. The input mixer can be used to mix the channels
before they are processed by the bi-quads and DRC, while the output mixer nodes are used to mix the
channels after they are processed through these blocks. The scaler blocks at the output can be used to
scale the outputs.
Clicking on any of these blocks displays their configuration options in the properties window.
shows an example where the output-mixer 0x51 is selected. Update the mixer configuration by changing
the values in the properties window.
Figure 20. Input, Output Mixer and Scaler Nodes
