Texas Instruments TAS5755MEVM, User Manual

Page: 10 / 28

Using the GUI Software
www.ti.com
10 SLOU481A – August 2017 – Revised October 2017
Submit Documentation Feedback
Copyright © 2017, Texas Instruments Incorporated
TAS5755MEVM Evaluation Module
3.3 Initializing the Device
Figure 10 shows a snap-shot of the GUI when it is first launched. The different blocks seen on the GUI
window are defined functions that can each be used to set the register space to a desired value. (For
example, the volume block shown in Green, can be used to set the desired master-volume level. Changes
made to this block, update the master-volume register with the corresponding hex value).
Figure 10. Default GUI Interface on Start-up
The drop-down properties menu seen on the right-hand side of the GUI window ( Figure 10 ) is used to
specify the device to be used. A zoomed snap-shot of the properties menu is shown in Figure 11 . Select
TAS5731 from the CurrentDevice option menu. Other settings like modulation scheme (AD or BD),
operation mode (2.0 or 2.1), and so forth, can also be specified using this menu.
Figure 11. Zoomed-In Snapshot of the Configuration Drop-Down Menu