Overview
3
SLOU439 – March 2016
Copyright © 2016, Texas Instruments Incorporated
TAS5733L Evaluation Module
1.1
Features
This EVM supports the following features:
•
Control via USB port using TI's PPC3
•
Two-Device 2.1 mode, one stereo device and one mono device, both with I²S input from PPCMB
•
Analog, optical, coaxial, and USB audio inputs available through PPCMB
2
EVM Setup
illustrates the EVM setup.
Figure 2. Evaluation Module and PurePath Console Motherboard Connection
2.1
Requirements
The following are required to operate and test this EVM:
•
TAS5733LEVM board
•
PurePath Console
motherboard
•
Banana cable, or bare wire lead pair for PVDD/GND connection via five-way binding posts.
•
Speaker cable with JST VHR-2N connector
•
2 × 8-
Ω
speakers for stereo test
•
1 × 4-
Ω
speakers for mono test
•
Power supply (8 V to 16.5 V)
•
Audio Source (Analog, USB, Optical)
•
Micro type-B USB cable
•
PurePath Console
3.xx GUI running on a PC
