Using the TAS5733LEVM with PurePath Console 3
13
SLOU439 – March 2016
Copyright © 2016, Texas Instruments Incorporated
TAS5733L Evaluation Module
Dump Current State into a Header File
This feature allows generation of a configuration file for the evaluated device according to the features
evaluated and configured with PPC3. Different options are available for file generation, including the
format (.h, .cfg, .mtk), sample rate, device address, and so forth. The generated file is saved in the PC or
can be sent to the output window that appears in the window. Take into account that the register
configuration is generated from the device that is selected (Mono or Stereo).
Use the tuning snapshots feature to save several different operation modes for the device in the end-
system. In order to achieve this, first select the desired snapshot, then go to the
End System Integration
window and generate the configuration file.
In-System Debugging
This tool helps debug the device when integrated in the end-system. This is possible by connecting the I²C
signals of the end-system device to the SCL, SDA, and GND test points of PPCMB. Limited features of
the TAS5733L application are available in this mode. Disconnect from
System Debug Mode
by clicking on
the
Disconnect
button on the lower left corner of the window.
In-System Tuning
Once the device is integrated in the end application, make fine tuning adjustments to the audio processing
with
In-System Tuning
. As with
In-System Debugging
, this is done by connecting I²C signals from PPCMB
to the end-system amplifier. Audio processing features are available in this mode, allowing the option to
fine tune the AGL, equalizers, and mixing block in the end system.
