7.7
AD 2.1 Mode and Line Out (2 x BTL Speaker Out + 1 Subwoofer Out + 1 Line Out, AD
Left
closed
closed
closed
Right
closed
OUT A
OUT B
OUT C
OUT D
JP3
JP2
JP1
JP4
J2
J3
J2
J6
J4
PVCC
DVDD
SUB_PWM–
BKND-ERR
VALID
J1
PVCC
DVDD
PWM_AP
PWM_CP
BKND-ERR
VALID
TAS5601EVM4
TPA6110A2
(HP Amplifier)
RC
Filter
HPR_PWM (Pin 13)
HPL_PWM (Pin 15)
0
BD 2.1 Mode and Line Out (2 x BTL Speaker Out + 1 Subwoofer Out + 1 Line Out, BD
Quick-Start Setup Guide
www.ti.com
MODE)
1. Set up the hardware as shown in the following illustration.
2. Go to
of this document, and save the script as
NAME.ini
3. Repeat steps 3 to 6 in
to load I
2
C command file.
MODE)
1. The hardware setup for the BD mode is the same as the setup for AD mode (step 1 of
).
All the speakers, subwoofer, and the headphone need to be connected to the TAS5706A.
26
TAS5706EVM2
SLOU220 – September 2008