2.2
Software Installation
Installation
www.ti.com
Download the TAS570X GDE from the TI Web site, which always has the latest release of the GUI. Check
versions for any updates to the GUI on the
.
Execute the GUI install program, Setup_TAS570X_version_number.exe
Once the program is installed, the program group and shortcut icon is created in Start
→
Program
→
Texas Instruments Inc
→
TAS570X GDE.
THE GUI come ups as shown in
.
Select the appropriate tab; in this case, select the TAS5705/TAS5706 tab.
It has two subwindows. One shows the Process Flow window. From the Process Flow window, each of
the signal processing function tools can be selected by clicking on it. The Biquad GUI and the DRC GUI
can be opened by using the right button of the mouse. This window also shows input select, Mode select,
Channel, and Master Volume. All functions are shown in the order that they are in the device.
The other subwindow, Properties window, has the properties where a user can update by selecting from
the available options. The properties that are available depends on the device selected. From the main
window, the user must set three properties before connecting to the EVM.
Select the device, Enable/Disable auto bank switch function and set the sample rate. The TAS5705
automatically detects sample rates. The setting here is simply to synchronize the GUI and the device.
Figure 5. Graphical User Interface Initial Window
TAS5705EVM2 : STEREO DIGITAL INPUT AMPLIFIER WITH EQ and DRC
8
SLOU223A – December 2008 – Revised January 2009
