Texas Instruments TAS5411EVM, User Manual, Page: 7 / 16

A008
A007
www.ti.com
Using the GUI With the TAS5411EVM Board
4.4 Read and I
2
C Log
The I
2
C log displays I
2
C registers read data (see Figure 8 ). An option exists for reading the three registers
all at once or individually. Pressing the Read Faults button displays the fault register value on the I
2
C log
as well.
Starting the GUI enables the I
2
C log. An option is available to turn off logging on the pulldown I
2
C Log
menu.
Figure 8. Read and I
2
C Log
4.5 I
2
C Polling
As mentioned above, the I
2
C polling is on when the GUI starts. To disable I
2
C polling, click on I
2
C polling
pulldown tab and unselect the check box. The polling time can also be changed as shown in Figure 9 .
Figure 9. I
2
C Polling
7 SLOU431 – November 2015 TAS5411EVM User's Guide
Submit Documentation Feedback
Copyright © 2015, Texas Instruments Incorporated