Texas Instruments TAS5411EVM, User Manual, Page: 6 / 16

A006
A005
Using the GUI With the TAS5411EVM Board
www.ti.com
4.2 Checking the Status Register
Figure 6 shows the status register. Click on Status-Diag (Read-Only) (0x02), shown in Figure 6 (blue
boxes for illustration only, not shown on GUI) and the register detail appears in the middle box.
Figure 6. Status Register
4.3 Checking and Changing the Control Register
Figure 7 shows the control register. In this register, one can change the default values for f
(SW)
,
SpeakerGuard protection circuitry, and gain. Select the desired check boxes; then click apply to
update the device status box.
Figure 7. Control Register
6 TAS5411EVM User's Guide SLOU431 – November 2015
Submit Documentation Feedback
Copyright © 2015, Texas Instruments Incorporated