2.4.5 Running the Process Flow
www.ti.com
Developing the Process Flow on the EVM
To run the process flow, use the build menu and select run.
Build >> Run
The GDE generates and assembles the code for the process flow, downloads it to the EVM, then resets
the TAS3208EVM-LC board. At this point the GDE switches from Edit Mode to Run Mode, and streams
audio from input to output.
For more advanced use of the GDE please refer to the GDE online help, Release Notes, and the
TAS3108/TAS3108A Audio DSP Instruction Set Reference, literature number
. These materials
are available via
.
SLEU097 – April 2008
Quick Setup Guide
15