Connecting to the PC Using CC31XXEMUBOOST Board
15
SWRU457A – February 2017 – Revised August 2018
Copyright © 2017–2018, Texas Instruments Incorporated
CC3120 SimpleLink™ Wi-Fi
®
BoosterPack™ Plug-In Module and IoT
Solution
The first COM port in the list is used for the flash programming (see
).
Figure 14. Portable Devices
NOTE:
The third COM port shown (COM97 for the example in
) is used for flash
programming.
lists the ports available on J5.
Table 7. Ports Available on J5
Port Number
Port Type
Usage
Comments
1
VCP
RT3
Used for TI internal debug only.
2
VCP
MAC logger
Used for TI internal debug only.
3.1.3
Driver Requirements
The FTDI Debug board requires users to install the associated drivers on a PC. This package is available
as part of the SDK release in the following folder:
[Install-Path]\CC3120-sdk\tools\cc31xx_board_drivers\.
The install path is usually C:\ti\CC3120SDK.
