Texas Instruments RF430FRL152HEVM, User Manual

Page: 3 / 32

www.ti.com
Introduction
1.2 What is Included
• RF430FRL152HEVM (see Figure 1 below)
• USB cable
• Quick start guide
1.2.1 RF430FRL152HEVM
Figure 1 shows a photograph of the RF430FRL152HEVM.
Figure 1. RF430FRL152HEVM
1.3 Required Additional Equipment
Optional recommended equipment:
• PC running Windows operating system to run the GUI for the TRF7970AEVM
• TRF7970AEVM for NFC/RFID communication with the RF430FRL152HEVM ( TRF7970AEVM )
1.3.1 TRF7970AEVM
Figure 2 shows a photograph of the TRF7970AEVM. If the TRF7970AEVM was purchased around the
same time as the RF430FRL152HEVM no code updates will be necessary. If there are communication
issues with the RF430FRL152HEVM, make sure that the TRF7970AEVM is programmed with the latest
firmware. The latest firmware for the TRF7970AEVM can be found
here .
Figure 2. TRF7970AEVM
3 SLAU607 – December 2014 RF430FRL152HEVM User's Guide
Submit Documentation Feedback
Copyright © 2014, Texas Instruments Incorporated