Texas Instruments RF430F5978 EVM Kit, User Manual, Page: 10 / 22

RF430F5978 EVM Kit – User Guide
10 / 22 11 – November 2013
e. The USB driver is now installed on your PC. The system is ready to use.
4.4 UHF Access Point COM Port Driver
Connect RF Access Point to a USB port on the PC. The Windows new device driver will request a new
device driver to be installed. Normally the driver should be detected automatically. If the driver is not
detected it can be found at the default location:
C:\ Program Files\RF430F5978 EVM Software \Drivers
After installation a new COM port will be installed on the PC. To see the COM port number, open the
Windows Control panel – System- Hardware – Device Manager and check the COM port number
under Ports (COM & LPT)