Texas Instruments PurePath TPA3251D2EVM, User Manual, Page: 4 / 21

Hardware Overview
www.ti.com
1.4 TPA3251D2EVM Clip Overtemperature and Fault Indicators
The TPA3251D2EVM is equipped with LED indicators that illuminate when the FAULT and/or CLIP_OTW
pin goes low. See
Table 2 and the TPA3251D2 data sheet ( SLASE40 ) for more details.
Table 2. Fault and Clip Overtemperature Status
FAULT CLIP_OTW Description
Overtemperature (OTE) or overload (OLP) or undervoltage (UVP). Junction temperature higher
0 0
than 125°C (overtemperature warning).
Overload (OLP) or undervoltage (UVP). Junction temperature higher than 125°C (overtemperature
0 0
warning).
0 1 Overload (OLP) or undervoltage (UVP). Junction temperature lower than 125°C.
1 0 Junction temperature higher than 125°C (overtemperature warning)
1 1 Junction temperature lower than 125°C and no OLP or UVP faults (normal operation)
4 TPA3251D2EVM SLVUAG8A – September 2015 – Revised October 2015
Submit Documentation Feedback
Copyright © 2015, Texas Instruments Incorporated