Texas Instruments PCM6 0Q1EVM-PDK Series, User Manual, Page: 16 / 67

Hardware Overview
www.ti.com
16 SBAU341B – January 2020 – Revised June 2020
Submit Documentation Feedback
Copyright © 2020, Texas Instruments Incorporated
PCM6xx0Q1EVM-PDK Evaluation Module
2.2.5 I
2
C Address Configuration
Configuring the address of the PCM6xx0Q1 device on the EVM is typically not required for evaluation use,
however configuring the address is supported by populating pullup or pulldown resistors on the I
2
C portion
of the control selection area, as shown in Figure 17 , on the bottom of the EVM.
Figure 17. I
2
C Control Selection
A configuration guide is provided in Table 4 for the convenience of the user.
Table 4. I
2
C Address Selection
I
2
C Address Installed Uninstalled
1001 000 R12, R14 R11, R13
1001 001 R11, R14 R12, R13
1001 010 R12, R13 R11, R14
1001 011 R11, R13 R12,R14