CodecControl Software
3.4.2
Command Dialog
Open the command dialog (View->Command…) to write, edit, load, save, and run command scripts.
Command scripts are text files that contain commands to communicate with the TI audio codec. The
syntax is described in
. The command dialog is shown in
Figure 4. Command Dialog
•
The primary area of the command dialog is the command buffer (editable text) which contains the
command script. Clicking the Run button runs the command script.
•
The smaller, read-only text area on the right side of the command dialog displays control data read
from the TI audio codec. The Clear button clears the Read Data field.
•
The one-line text edit field on the left bottom allows single command execution.
•
The Record check box enables recording of commands generated by the control software.
12
PCM5122/42EVM-U
SLAU444 – May 2012
Copyright © 2012, Texas Instruments Incorporated
