Texas Instruments PCM510 EVM-U Series, User Manual, Page: 3 / 23

www.ti.com
PCM510xEVM-U
2 PCM510xEVM-U
2.1 Electrostatic Discharge Warning
Many of the components on the PCM510xEVM-U are susceptible to damage by electrostatic discharge
(ESD). Customers are advised to observe proper ESD handling precautions when unpacking and handling
the EVM, including the use of a grounded wrist strap at an approved ESD workstation.
CAUTION
Failure to observe ESD handling procedures may result in damage to EVM
components.
2.2 Overview
The PCM510xEVM-U is an easy to use, USB-interface, multi-functional system allowing for digital
optical/SPDIF, line or external I
2
S ™ input with varying options for clock sources and clock frequencies.
Along with onboard sample rate conversion, this architecture allows for versatile use and testing of the
PCM510x family of parts.
Figure 1 shows the PCM510xEVM-U with the jumper and switch locations
noted.
(1) The silkscreen label shown on the board may be different to indicate a specific device. Otherwise, the EVM is
identical to the one shown here.
Figure 1. PCM510xEVM-U
3 SBAU190A – May 2011 – Revised June 2011 PCM510xEVM-U
Submit Documentation Feedback
Copyright © 2011, Texas Instruments Incorporated