FAQ
24
SLAU747B – October 2017 – Revised January 2019
Copyright © 2017–2019, Texas Instruments Incorporated
MSP432P4111 SimpleLink™ microcontroller LaunchPad™ development kit
(MSP-EXP432P4111)
Figure 15. SWD Mode Settings
4. When the settings of Port J (PJSEL0 and PJSEL1 bits) are changed, full JTAG access is prevented on
these pins. Changing to use SWD allows access through the dedicated debug pins only.
5. If even this can’t connect, reset the device to factory settings
6. Select
View -> Target Configurations.
CCS will show the target configuration
Figure 16. Target Configurations
If using the onboard debug probe, XDS110-ET is shown.
7. Right click
Launch Selected Configuration
Figure 17. Launch Selected Configuration
8. The debug probe now connects to the device (which is still possible), but does not try to halt the CPU,
write to registers or even download code (which would not be possible). The Debug view that is
spawned shows the CPU core, but marks it as disconnected.
9. Right click
Show all cores
