![Texas Instruments mmWaveICBoost User Manual Download Page 31](http://html1.mh-extra.com/html/texas-instruments/mmwaveicboost/mmwaveicboost_user-manual_1095495031.webp)
3 xWR6843ISK / IWR6843ISK-ODS REV C
and
shows the front and rear view of xWR6843ISK EVM, respectively. This EVM includes
onboard etched long range antennas for the four receivers and three transmitters. The xWR6843 operates at a
4-Ghz bandwidth from 60 to 64 GHz, with a maximum output power of 10 dBm; the xWR6843ISK has an
antenna gain of ~7 dBi and the IWR6843ISK-ODS has an antenna gain of ~5 dBi.
Note
This chapter applies to Rev. C and up of the AWR6843ISK, IWR6843ISK, and IWR6843ISK-ODS.
3.1 Hardware
CAUTION HOT SURFACE
CONTACT MAY CAUSE BURN
DO NOT TOUCH
3.1.1 xWR6843ISK EVM
Note
The xWR6843ISK has been tested in the 60-64GHz band across the temperature range of -20°C to
60°C. The device is intended for use within the aforementioned limits.
Note
In accordance to the EN 62311 RF exposure test, a minimum separation distance of 20 centimeters
should be maintained between the user and the EVM during operation.
Figure 3-1. xWR6843ISK Front View
xWR6843ISK / IWR6843ISK-ODS REV C
SWRU546D – OCTOBER 2018 – REVISED NOVEMBER 2020
mmWaveICBoost and Antenna Module
31
Copyright © 2020 Texas Instruments Incorporated