LMT01 Setup and Operation
4.
GUI Descriptions
•
GRAPH Tab
–
Start Graph: Graph displays temperature or pulse count. One data point on the graph
corresponds to one temperature reading or pulse count in the time interval specified in the
“Graph Measure Period (ms)
–
Stop Graph: Stops the graph from updating temperature or pulse count
–
Current Value: Shows the current temperature or pulse count value
–
Save Graph Data to File: Saves the pulse count data to a .csv file
–
Y-Axis in °C: Toggle between the Y-Axis to be in temperature or # of pulse counts
–
Graph Measure Period (ms): One measurement will be made every period specified in the box
Figure 8. GRAPH Tab Page
–
LMT01 Silicon: Select between Pre-Final and Final silicon
–
Comparator Reference: Select voltage reference for comparator threshold settings, default is
1.5V
9
SNIU027A – March 2015 – Revised October 2015
LMT01EVM
Copyright © 2015, Texas Instruments Incorporated
