VOUT
Connection:
Load
VIN
Connection
with EMI Filter:
Input Supply
VIN
Connection:
Input Supply
Posts, Probes, and Jumpers
3
SNVU636 – November 2018
Copyright © 2018, Texas Instruments Incorporated
LMR36015xxxEVM User’s Guide
1
Posts, Probes, and Jumpers
This section describes the test points and connectors on the EVM and how to properly connect, set up,
and use the LMR36015AEVM and the LMR36015FSCEVM.
1.1
Screw Terminal Connectors
The screw terminals on the top of the board can be used for connecting to the input and output of the
EVM. See
for the screw terminal connections. The functions of the screw terminal connections
are:
•
VIN -
Input supply to EVM. Connect to a suitable input supply. See
for input
supply requirements.
•
GND -
System ground.
•
IN+ -
Input supply to EVM including an EMI filter. Connect to a suitable input supply. See
for input supply requirements.
•
IN– -
System ground including an EMI filter.
•
VOUT -
Output of EVM — connect to desired load.
Figure 1. EVM Board Connections
