Texas Instruments LMK04368EPEVM, User Manual

Page: 2 / 41

1 Evaluation Board Kit Contents
Table 1-1 lists the components found in the evaluation board kit.
Table 1-1. EVM Contents
HSDC141
Evaluation Board LMK04368EPEVM Evaluation Board with VCXO (1)
USB cable USB Cable A Plug to Micro B Plug cable (1)
2 Quick Start
Figure 2-1. Quick Start Diagram
Related information: http://www.ti.com/tool/ticspro-sw
2.1 Quick Start Description
The LMK04368EP EVM allows full verification of the device functionality and performance specifications. To
quickly set up and operate the board with basic equipment, refer to the quick start procedure below and test
setup shown in
Figure 2-1 .
1. Connect a voltage of 4.5 V to the V
CC
SMA connector or terminal block. The LMK04368-EP and onboard
VCXO operate at 3.3 V provided by the onboard TPS7A4701-EP LDO and LP5900 LDO, respectively.
Evaluation Board Kit Contents www.ti.com
2 LMK04368EPEVM User’s Guide SNAU283 – OCTOBER 2022
Submit Document Feedback
Copyright © 2022 Texas Instruments Incorporated