CLKins and PLLs Page
23
SNAU200 – September 2016
Copyright © 2016, Texas Instruments Incorporated
TICS Pro Usage
A.2
CLKins and PLLs Page
The CLKins and PLL page allows the user to change select device operation mode, select clock input and
PLL operational frequencies.
The OSCin Source control doesn't control an actual register but unlinks the VCXO frequency from OSCin
to allow for single PLL operation of PLL2.
Likewise the "selected clock input for PLL1" combobox allows the user to select which input clock to use
for frequency calculations, this is important for Pin Select and Auto CLKin Select modes.
Figure 13. CLKins and PLLs page
