Register Map
Register Field
Descriptions
Register Data
Generic
Read/Write
Configuration buttons
www.ti.com
Amplifier Device Register Configuration
7
SLOU454 – June 2016
Submit Documentation Feedback
Copyright © 2016, Texas Instruments Incorporated
LMH2832EVM-50 Evaluation Module
5.2
Low Level View
The
Low Level View
tab, shown in
Figure 4
, allows configuration of the devices at the bit and field level. At
any time, the controls described in
Table 4
may be used to configure or read from the device.
Figure 4. Low Level View Tab
Table 4. Low Level View Controls
Control
Description
Register Map
Displays the devices on the EVM, registers for those devices, and the states of the registers:
• Selecting a register field allows bit manipulation in the
Register Data
section.
• The
Value
column shows the value of the register at the time the GUI was last updated due to a
read or write event.
Write Register button
Write to the register highlighted in the
Register Map
with the value in the
Write Data
field. This button
must be clicked after changing bits in the register data section.
Read Register button
Read from the register highlighted in the
Register Map
and display the results in the
Value
column.
Read All button
Read from all registers in the
Register Map
and display the current state of hardware. Also updates the
controls in the other tabs.
Load Config button
Load a configuration file from disk and write the registers in the file.
Save Config button
Save a configuration file to disk that contains the current register configuration.
Register Data Cluster
Manipulate individual accessible bits of the register highlighted in the
Register Map
.
Generic Read/Write
Register buttons
Perform a generic read or write command to the device shown in the Block drop-down box using the
Address
and
Write Data
information.
