Quick Start
3
SNVU579 – September 2017
Copyright © 2017, Texas Instruments Incorporated
LM73605 / LM73606 EVM User’s Guide
2
Quick Start
1. Connect the voltage supply between VIN and PGND connectors, using short and thick wires.
2. Connect the load of the converter between VOUT and PGND connectors, using short and thick wires.
3. Set the supply voltage (V
IN
) at an appropriate level between 6 V to 36 V. Set the current limit of the
supply to an appropriate level as well.
4. Turn on the power supply. With the default configuration, the EVM should power up and provide V
OUT
=
5 V.
5. Monitor the output voltage. The maximum load current should be 5 A with LM73605, or 6 A with
LM73606.
See
for the location of the connectors.
Figure 3. Top View of LM73605/LM73606 EVM