Texas Instruments LDC2114, User Manual, Page: 28 / 60

Sensing Solutions EVM GUI
www.ti.com
28 SNOU144 – December 2016
Submit Documentation Feedback
Copyright © 2016, Texas Instruments Incorporated
LDC2114 Evaluation Module for Inductive Touch Inductance to Digital
Converter
4.7.9 Status
The Status section, as shown in Figure 27 , reports the flags in the STATUS register of the LDC2114.
Figure 27. Device Status
4.8 Streaming Measurement Data
The Sensing Solutions GUI and EVM provide a tool to capture, display, and log measurement data. The
section describes how to use the data measurement tools from the
Data Streaming page accessible from
the GUI menu.
4.8.1 Choosing Visible Channels
To select which channel measurements are displayed in the graph, check or uncheck the available
channels shown next to the graph units. Selecting or not selecting the channels only affects the graph and
not the data logged to a file. If a channel is not enabled in the Configuration page it will not appear on the
Data Streaming page.
Figure 28 shows a streaming window in which channel 0 and channel 1 are
enabled, and channel 1 shows a button press.