Quick Start Guide LDC131x/161x Evaluation Module
4.
By default, the EVM will be performing conversions only on Channel 0 and Channel 1. If other channel
conversion is desired, select the appropriate channel in the Channel Config toolbar: Go back to the
Streaming tab.
Figure 5. Configuration Registers
5. Select Start in order to begin streaming the data.
Figure 6. Start Streaming
6. The data will update in the graph shown in
: Zoom into each tab if needed by right clicking on
it and selecting "Zoom to".
Figure 7. Streaming Data from Two Channels
7
SNOU133 – December 2014
LDC131x and LDC161x EVM User’s Guide
Copyright © 2014, Texas Instruments Incorporated
