Texas Instruments IWR6843L EVM, User Manual, Page: 10 / 16

5.5 DCA1000 HD Connector
The 60-pin HD connector shown in Figure 5-3 provides the high-speed LVDS data, and controls signals (SPI,
UART, Inter-Integrated Circuit (I2C), NRST, NERROR, and SOPs) to the DCA1000.
Figure 5-3. DCA1000 HD Connector
5.6 MMWAVEICBOOST HD Connector
The 60-pin HD connector shown in Figure 5-4 provides the high-speed LVDS data, controls signals (SPI, UART,
I2C, NRST, NERR, and SOPs) and JTAG debug signals to the MMWAVEICBOOST. The Trace and DMM
interface lines are also available through this connector (not connected by default).
Figure 5-4. MMWAVEICBOOST HD Connector
5.7 CANFD Connector
The CAN connector provides access to the two CAN_FD interfaces (CAN_L and CAN_H signals) from the
onboard CAND-FD transceivers. These signals can be directly wired to the CAN bus.
Figure 5-5. CANFD Connector
Hardware Details www.ti.com
10 IWR6843L EVM SWRU585 – NOVEMBER 2021
Submit Document Feedback
Copyright © 2021 Texas Instruments Incorporated