Overview
1
Overview
The
is a family of voltage-output current-shunt monitors that integrate an internal shunt resistor to
enable high-accuracy current measurements. The INA250 family of devices consists of the INA250A1,
INA250A2, INA250A3, and INA250A4. In this document, the INA250A2 is used for evaluation and is
synonymous with the INA250.
The INA250EVM consists of one PCB. The PCB consists of the INA250A2 device, banana jack-terminals,
screw-terminals, and test points for external hardware connections.
1.1
INA250EVM Kit Contents
summarizes the contents of the INA250EVM kit. Contact the
nearest you if any component is missing. It is highly recommended that you also check
the
respective device product folder
on the TI web site at www.ti.com for any further information regarding
this product.
Table 1. INA250EVM Kit Contents
Item
Quantity
INA250 test board
1
1.2
Related Documentation from Texas Instruments
The following document provides information regarding Texas Instruments' integrated circuits used in the
assembly of the INA250EVM. This user's guide is available from the TI web site under literature number
. Any letter appended to the literature number corresponds to the document revision that is
current at the time of the writing of this document. Newer revisions may be available from the
or call the Texas Instruments' Literature Response Center at (800) 477-8924 or the Product Information
Center at (972) 644-5580. When ordering, identify the document by both title and literature number.
Table 2. Related Documentation
Document
Literature Number
product data sheet
3
SBOU153 – May 2015
INA250EVM User's Guide
Copyright © 2015, Texas Instruments Incorporated
