Texas Instruments INA223EVM User'S Manual And Software Tutorial Download Page 12 | Manualshive

Page: 12 / 26

Texas Instruments INA223EVM User'S Manual And Software Tutorial Download Page 12

INA223EVM Software Setup

4

INA223EVM Software Setup

This section discusses how to install the INA223 software.

4.1

Operating Systems for INA223EVM Software

The INA223 software has been tested on the Microsoft Windows XP operating system (OS) with United
States and European regional settings. This software should also function on other Windows operating
systems.

4.2

INA223 Software Installation

The INA223EVM software is included on the CD that is shipped with the EVM kit. It is also available
through the INA223EVM product folder on the TI web site. To download the software to your system,
insert the disc into an available CD-ROM drive. Navigate to the drive contents and open the INA223EVM
software folder. Locate the compressed file (INA223EVM.zip) and open it. Extract the INA223EVM files
into a folder labeled INA223EVM (for example, C:\INA223EVM) on your hard drive.

After the files are extracted, navigate to the INA223EVM folder you created on your hard drive. Locate the
setup.exe file and run it to start the installation. The INA223 software installer file opens to begin the
installation process, as shown in

Figure 11. Software Install Window

12

INA223EVM User’s Guide and Software Tutorial

SBOU125 – June 2012

Submit Documentation Feedback

Copyright © 2012, Texas Instruments Incorporated

«
...
10
11
12
13
14
...
»

Summary of Contents for INA223EVM



























Reviews:

No comments