GUI Operation
Figure 19. Selecting Auto-Read Interval on Register Page
3.4.2
Manually Updating Device Register Values
There are two methods to change register values: update the entire register value or change a single bit
within the register. The recommended update mode is always “Immediate” and not “Deferred”. To update
register values, follow these steps.
1. Double-click the current value of the register that needs to be changed. The text will turn into an
editable text box
15
SNAU181A – June 2015 – Revised June 2015
HDC1050EVM User 's Guide
Copyright © 2015, Texas Instruments Incorporated