Texas Instruments Hall-Hinge-EVM, User Manual

Page: 5 / 12

Figure 3-6. B222 - N42 Cube Magnet
1. Locate the HALL-HINGE-EVM PCBs. TMAG5231 may be evaluated on this PCB with or without the use of
the 3D structures. The device may be powered by connecting a voltage source or battery as indicated in
Figure 3-7 .
GND
OUT
VCC
Figure 3-7. Wiring Guide
2. To evaluate using the 3D structure, insert the snapped off PCB into the SENS093_Sensor.
Figure 3-8. Install PCB to SENS093_Slider
3. Slide the SENS093_Sensor into the SENS093_Track as shown in Figure 3-9 .
www.ti.com Operation
SLYU062 – FEBRUARY 2022
Submit Document Feedback
Hall-Hinge-EVM 5
Copyright © 2022 Texas Instruments Incorporated