![background image](http://html.mh-extra.com/html/texas-instruments/ez-fet-emulation-ip/ez-fet-emulation-ip_user-manual_1094522006.webp)
Hardware Identification
6
SLAU647L – July 2015 – Revised February 2018
Copyright © 2015–2018, Texas Instruments Incorporated
MSP Debuggers
3
Hardware Identification
3.1
How to Determine If Your Hardware is Based on eZ-FET or eZ-FET Lite
•
Check the installed tool drivers by using the Windows Device Manager. eZ-FET tools enumerate as
CDC "MSP Debug Interface" and CDC "MSP Application UART1" devices (see
•
Check the Experimenter Board or LaunchPad emulation section to find out if it is based on an eZ-FET
tool. If it is based on an MSP430F5528 device, it is an eZ-FET tool.
•
There is a small print on the silkscreen that indicates eZ-FET or eZ-FET Lite (see
and
Figure 1. eZ-FET Windows Enumeration
Figure 2. eZ-FET Emulation IP
Figure 3. eZ-FET Lite Emulation IP