manualshive.com logo in svg

Texas Instruments Extensa 570CD, Maintenance Manual, Page: 73 / 85

Share
Download
Texas Instruments Extensa 570CD Maintenance Manual Download Page 73

6.5.15

Removing/Replacing Inverter Board

To remove and replace the inverter board assembly, perform the following
procedure:

c

Caution: Prior to removing the LCD bezel, ensure that the AC adapter
is disconnected and that all internal battery packs are removed. Fail-
ure to observe this precaution could expose you to dangerous high 
voltages.

1

.

Remove the top case assembly as described in Paragraph 6.5.8. 

2

.

Remove the main board assembly as described in Paragraph 6.5.13.

3

.

Turn the main board over and lay on a flat surface.

4

.

Unplug the speaker cable assembly connected to the display interface
board.

5

.

Remove the four rubber screw covers and the four screws beneath the
covers.

6

.

Pull on the inside edges of the bezel to remove it starting with the
bottom of the bezel.

7

.

Disconnect the connectors at the top and bottom of the inverter board.

8

.

Use a small Phillips-head screwdriver to remove the two screws 
holding the inverter board to the plastics. Remove the inverter board.

9

.

To replace the inverter board, reverse Steps 1 through 8.

 

Field Service   

6-15  

Summary of Contents for Extensa 570CD






















































































Reviews:

No comments