
Copyright © 2016, Texas Instruments Incorporated
K2G SoC
CAN
Transceiver
ISO1050DUB
DB9
Connector
DCAN_TX
DCAN_RX
Copyright © 2016, Texas Instruments Incorporated
K2G SoC
COM8
Connector
OE#
Level
Translator
SN74AVC4T245PW
SDIO Buffer
TXB0108PWR
MMC1_D [0-3]
MMC1_CMD
WLAN_EN
UART1_TX
UART1_RX
UART1_CTS
MMC1_CLK
UART1_RTS
MCASP2_AXR [0:1]
MCASP2_ACLKR
MCASP2_AFSR
System Description
34
SPRUI65A – April 2016 – Revised January 2018
Copyright © 2016–2018, Texas Instruments Incorporated
K2G General Purpose Evaluation Module (EVMK2G)
3.19 COM8 Connector
The COM8 connector interface is generally used to communicate with wireless modules. It can be
connected to a WiLink™ 8 module. A Level Translator SN74AVC4T245PW is used to convert the signals
UART and McASP from 3.3V to 1.8V as shown in
.
Figure 24. COM8 Connector Interface Block Diagram
3.20 DCAN
The CAN transceiver ISO1050DUB is connected to DCAN0 and DCAN1 interface of the processor as
shown in
Figure 25. DCAN Interface Block Diagram