Example Applications
2.5
Pressure Measurement with the BMP180 (pres-
sure_bmp180)
This example demonstrates the basic use of the Sensor Library, TM4C123G LaunchPad and the
SensHub BoosterPack to obtain air pressure and temperature measurements with the BMP180
sensor.
Connect a serial terminal program to the LaunchPad’s ICDI virtual serial port at 115,200 baud. Use
eight bits per byte, no parity and one stop bit. The raw sensor measurements are printed to the
terminal. The RGB LED blinks at 1Hz once the initialization is complete and the example is running.
2.6
Temperature Measurement with the TMP006 (temper-
ature_tmp006)
This example demonstrates the basic use of the Sensor Library, TM4C123G LaunchPad and the
SensHub BoosterPack to obtain ambient and object temperature measurements with the Texas
Instruments TMP006 sensor.
Connect a serial terminal program to the LaunchPad’s ICDI virtual serial port at 115,200 baud.
Use eight bits per byte, no parity and one stop bit. The raw sensor measurements are printed to
the terminal. The RGB LED blinks at 1Hz once the initialization is complete and the example is
running.
February 22, 2017
9
