3.4.2 ALP Does Not Detect the EVM
If the following window opens after starting the ALP software, double check the hardware setup.
Figure 3-20. ALP No Devices Error
It may also be that the USB2ANY driver is not installed. Check the device manager. There should be a
HID-compliant device
under the
Human Interface Devices
as shown below.
Figure 3-21. Windows 7, ALP USB2ANY Driver
Troubleshooting
24
DS90UB95x-Q1 Serializer Evaluation Module
SNLU224C – SEPTEMBER 2017 – REVISED APRIL 2021
Copyright © 2021 Texas Instruments Incorporated
