Texas Instruments DS90UB95 Q1EVM Series, User Manual, Page: 3 / 64

www.ti.com
Introduction
3 SNLU223A – August 2017 – Revised May 2019
Submit Documentation Feedback
Copyright © 2017–2019, Texas Instruments Incorporated
DS90UB95x-Q1EVM Deserializer User's Guide
3 MIPI CSI-2 Output Signals - J5 and J6 Pinout
..........................................................................
9
4 FPD-Link III Signals
........................................................................................................
10
5 IDx I
2
C Device Address Select - J23
....................................................................................
10
6 I
2
C Interface Header - J25
................................................................................................
10
7 VDDIO Interface Header - J16
...........................................................................................
11
8 GPIO Interface Header - J22
.............................................................................................
11
9 CMLOUT Output Signals
..................................................................................................
11
10 FPD-Link III Mode Control- J15
..........................................................................................
11
11 Device Mode Control - J11
...............................................................................................
11
12 LEDs
.........................................................................................................................
12
13 DS90UB95x-Q1EVM BOM
................................................................................................
57
Trademarks
All trademarks are the property of their respective owners.
1 Introduction
NOTE: The demo board is not optimized for EMI testing. The demo board was designed for easy
accessibility to device pins with tap points for monitoring or applying signals, additional pads
for termination, and multiple connector options.
Figure 1. DS90UB95x-Q1EVM