Texas Instruments DS90UB95 Q1EVM Series, User Manual, Page: 4 / 64

DS90UB954-Q1
Deserializer
DS90UB933
Serializer
C
SI
-2
T
x
Po
rt
RAW 10/12
MIPI CSI-2
1.6 Gbps/lane X 4
Host / ISP
DS90UB953
Serializer
MIPI CSI-2
3.2 Gbps
Quick Start Guide
www.ti.com
4 SNLU223A – August 2017 – Revised May 2019
Submit Documentation Feedback
Copyright © 2017–2019, Texas Instruments Incorporated
DS90UB95x-Q1EVM Deserializer User's Guide
2 Quick Start Guide
2.1 System Requirements
2.1.1 Included Components
The major components of the DS90UB95x-Q1EVM are:
• DS90UB95x-Q1
• On-board Power-over-Coax (PoC) interface
• FAKRA coax connector(s) for digital video, power, control and diagnostics
• Samtec QSH type connector for CSI-2 interface
• On-board I
2
C programming interface
2.1.2 Additional Required Components
To demonstrate the functionality of the DS90UB95x-Q1, the following components are required (not
included):
• One compatible serializer.
• One DACAR/FAKRA coax cable
• USB to mini USB cable OR I
2
C host controller that supports clock stretching (such as USB2ANY)
• Power supply for 12V @ 1A (current limited bench supply recommended)
• Optional: MIPI CSI-2 output analyzer or host processor
2.2 Applications Diagram
Figure 2. Applications Diagram