Texas Instruments DS90UB926QSEVB, User Manual

Page: 8 / 35

www.ti.com
8 DS90UB926QSEVB User’s Guide Sept 2012
3.3.4. Installation of the USB driver
There are 6 steps to install the USB driver:
1. Select “No, not at this time” then select the “Next” button.
2. Select “Install from a list or specific location” then select the “Next” button.
3. Select “Search for the best driver in these locations”. Uncheck “Search
removable media” and check “Include this location in the search”.
4. Browse to the Install Directory which is typically located at “C:\Program
Files\National Semiconductor Corp\Analog LaunchPAD\vx.x.x\Drivers” and
select the “Next” button. Windows should find the driver.
5. Select “Continue Anyway”.
6. Select the “Finish” button.
The software installation is complete. The ALP software may now be launched, as
described in the next section.
3.3.5. Startup - Software Description
Make sure all the software has been installed and the hardware is powered on
and connected to the PC. Execute “Analog LaunchPAD” from the start menu.
The default start menu location is “Programs\National Semiconductor
Corp\Analog LaunchPAD vx.x.x\Analog LaunchPAD”.