Texas Instruments DS560MB410EVM, User Manual, Page: 11 / 29

Figure 5-8. Block Diagram Tab
Table 5-2. Block Diagram Settings and Buttons
Seting or Button Name Behavior
Update Time Sets the time interval at which the device status is updated.
Channel Select This setting is persistent when switching between the Device Status , Block Diagram , and
Crosspoint Switch tabs.
This setting is used to select which channel will be written to when Apply to Channel is
clicked.
Refresh From Device Reads register data from the device. This data will then be updated in the DS560MB410
Profile pages.
Reset Device Resets all device registers to their default values.
Load From File Opens a window allowing the user to select a file with register data. Once the appropriate file
is selected, register data from the file will be written to device registers.
Save To File Opens a window enabling the user to save device register data to their computer. This file
contains data for all of the device registers.
Apply to Channel Applies channel settings to the channel selected by the Channel Select setting.
Apply to All Channels Applies channel settings to all device channels.
Power Down Channel Powers down channel that is currently selected by the Channel Select ” setting. Corresponds
to channel register 0x04[6] and 0x04[3].
Power Down All Channels Powers down all channels. Corresponds to channel register 0x04[6] and 0x04[3].
Power Up Channel Powers up channel that is currently selected by the Channel Select ” setting. Corresponds to
channel register 0x04[6] and 0x04[3].
Power Up All Channels Powers up all channels. Corresponds to channel register 0x04[6] and 0x04[3].
Driver VOD Sets the differential output voltage (VOD) for the selected channel. Select from 0-3.
Corresponds to channel register 0x06[7:6].
EQ Boost Code Enables compensation for insertion loss. Select from 0-30. Corresponds to channel register
0x10[5:0].
EQ Mode Enables selection of different equalization profiles depending on device use case. Select
either
PCB EQ or Cable EQ . Corresponds to channel register 0x04[0].
www.ti.com SigCon Architect
SNLU296A – DECEMBER 2022 – REVISED DECEMBER 2022
Submit Document Feedback
DS560MB410EVM 11
Copyright © 2022 Texas Instruments Incorporated