Setup
11
SNLU213A – October 2016 – Revised September 2019
Copyright © 2016–2019, Texas Instruments Incorporated
DS280MB810EVM User’s Guide
11. In order to program each of the internal 2x2 crosspoints, navigate to the “Crosspoint Switch” tab on
the “High Level Page” as shown below in
. The Crosspoint Switch Status of the entire device is
displayed on the right-hand side. The colors help to show the configuration of each channel in the
DS280MB810.
•
Crosspoint Configuration:
–
Default: Results in a 1:1 function.
–
Fanout: Results in a 1:2 function
–
Lane Crossing: Swaps the outputs within the 2x2 crosspoint
Figure 9. SigCon Architect High Level Page: Crossspoint Switch.
Figure 10. SigCon Architect High Level Page: Crosspoint Switch.