DS16EV51-AEVKD User Guide Rev A
December 2008
© National Semiconductor Corporation
3
Quick Start Guide:
1.
Connect 3.3V DC power to J4 and ground to J5 from the power supply.
Or, plug the AC/DC power adapter to the DC power Jack
AC/DC power adapter requirement: Output DC 4V~6V, Output current > 800mA
2.
Attach two DVI cables to the DVI Input and Output Connectors
3.
Turn on the DVD/Computer and the Monitor/HDTV.
Adjustment and Control Description
Component Name
Function
D4
PWR
The LED turns on when 5V DC applied
D5
SD
The LED turns on when the DS16EV5110 does not detect clock signal
J47
5V DC
Optional DC Power Jack for 1.8 mm Adaptor Plug
J4
3.3V
3.3V VCC power supply
J5 GND
GND
J10
FEB and GND
Optional SMBus control of U14 (See Datasheet)
J9
CS and VDD
Optional SMBus control of U14 (See Datasheet)
J7
FEB and GND
Optional SMBus control of U13 (See Datasheet)
J8
CS and VDD
Optional SMBus control of U13 (See Datasheet)
J11, J12
SDA, SDC and GND Optional SMBus access (See Datasheet)
J15
Loop Back Control
Connect “LED” and “SD” to enable D5 function.
Connect “SD” and “EN” to enable look back control function. When the clock
signal is not detected, the DS16EV5110A enters power down mode.
U3 Rotary
Switch
Turn the switch to control the EQ boost setting. “0” on the switch refers to the
boost setting of “0X00”, “7” on the switch refers to the boost setting of “0X07”.
See datasheet for detail Boost setting information.
Connection in Dual Link Application
DS16EV5110A
DS16EV5110A
D0
D1
D2
CLK
D3
D4
D5
D0
D1
D2
CLK
D3
D4
D5
CLK
CLK
SD
SD
EN
EN
CS
CS