Texas Instruments DS100BR410EVK-4, User Manual, Page: 6 / 13

Quick Start User Guide
www.ti.com
Table 2. Connection and Control Description
Component Name Function
IN0+, IN0-,
IN1+, IN1-,
J1 to J8 High speed differential inputs.
IN2+, IN2-,
IN3+, IN3-
OUT0+, OUT0-,
OUT1+, OUT1,
J9 to J16 High speed differential outputs.
OUT2+, OUT2-,
OUT3+, OUT3-
J19 VDD/GND DC Power – VIN direct to DS100BR410SQ
GND, CS, Optional SMBUS access pins.
J18
SCL, SDA See the datasheet for additional information on SMBUS.
OOB_DIS = L (internal pull-down: OOB support is enabled).
When OOB_DIS = H, the OOB squelch function is disabled.
J17 OOB_DIS, RES
NOTE: The silkscreen text is incorrect for RES and OOB_DIS, the RES is the
OOB_DIS.
VOD_SEL,
SW1 Switch to set VOD and DE level when PIN_MODE = H (SW=OFF)
DE_SEL
PIN_MODE or SMBUS MODE.
PIN_MODE,
SW2 Pin control for BST_[2:0], VOD_SEL, DE_SEL when PIN_MODE = H
BST_[2:0]
(SW=OFF). SMBUS control when PIN_MODE = L (SW=ON).
SD1, EN1,
SD2, EN2,
SW3 Signal Detect for CH0 to CH3 and enable pin control for CH0 to CH3.
SD1, EN1,
SD2, EN2
6 DS100BR410EVK-4 User Guide: 4 Channels SMA Evaluation Kit SNLU152 – October 2013
Submit Documentation Feedback
Copyright © 2013, Texas Instruments Incorporated