Texas Instruments DRV602EVM2, User Manual, Page: 11 / 18

6.6 Pop/Click (Enable)
6.7 Pop/Click (Disable)
Enable
Output
100 mV/div
0 V Input
Output
2 V/div
Enable
1 V Input
2 V Output
www.ti.com
DRV602EVM2 Performance
The characteristic performance for pop and click interference is shown with and without an input signal
applied, with a load of 2.5 k
Ω
. Measurement results are presented in a time domain domain.
For Figure 10 , the power supply is applied, and then the shutdown signal is released. The shutdown signal
triggers the measuring system.
Figure 10. Pop/Click (Enable)
As with Section 6.6 , characteristic performance for pop and click interference is shown with and without an
input signal applied, with a load of 2.5 k
Ω
. Measurement results are again presented in a time domain
format.
Figure 11. Pop/Click (Disable)
SLOU248A – December 2008 – Revised January 2009 DRV602EVM2 11
Submit Documentation Feedback