User's Guide
SLOU248A – December 2008 – Revised January 2009
DRV602EVM2
DRV602EVM2
This user’s guide describes the operation of the DRV602 evaluation module. This document also provides
measurement data and design information including a schematic, bill of materials, and printed circuit board
(PCB) layout drawings.
Contents
1
2
Quick Setup
3
On/Off Sequence
4
Component Selection
5
Layout Recommendations
..................................................................................................
6
DRV602EVM2 Performance
...............................................................................................
7
Related Documentation from Texas Instruments
......................................................................
8
Design Documentation
....................................................................................................
List of Figures
1
DRV602EVM2 Functional Block Diagram
................................................................................
2
Power-Up/-Down Sequence
................................................................................................
3
Second-Order, Active Low-Pass Filter
....................................................................................
4
Differential Input, Second-Order Active Low-Pass Filter
...............................................................
5
THD+N versus Voltage
6
THD+N versus Frequency
..................................................................................................
7
FFT Spectrum with –60-dBFS Tone
......................................................................................
8
Channel Separation
9
Frequency Response
10
Pop/Click (Enable)
DirectPath is a trademark of Texas Instruments.
Blu-ray Disc is a trademark of Blu-ray Disc Association.
All other trademarks are the property of their respective owners.
SLOU248A – December 2008 – Revised January 2009
DRV602EVM2
1
