Sitara
™
Proven technology. Inspiring innovation.
For more information:
www.ti.com/dm8148
www.ti.com/am3874
DM814x/AM387x
Evaluation Module
Quick Start Guide
For tips and tricks and more documentation, please visit
and select your platform.
For support questions, please contact:
or
For more information on the DM814x/AM387x Evaluation Module
please visit:
To obtain the latest release for TI’s EZ Software Development Kit
(SDK), please visit:
or
processors.wiki.ti.com
evm8148
support.ti.com
e2e.ti.com/dm814x
e2e.ti.com/am387x
www.ti.com/
www.ti.com/dmezsdk
www.ti.com/amezsdk
described herein are sold subject to TI’s standard terms and conditions of sale. Customers are advised to
current and complete information about TI products and services before placing orders. TI
applications assistance, customer’s applications or product designs, software
patents. The publication of information regarding any other company’s
TI’s approval, warranty or endorsement thereof.
obtain the most
assumes no liability for
performance, or infringement of
products or services does not constitute
Important Notice:
The products and services of Texas Instruments Incorporated and its subsidiaries
The platform bar is a trademark of Texas Instruments.
All other trademarks are the property of their respective owners.
Trademarks in this issue:
© 2011 Texas Instruments Incorporated
Printed in U.S.A. by (Printer, City, State)
DC_CQSG_A
SPRP802
10
Application Launcher
should display on the LCD
within approximately one
minute. Note: By default,
the HDMI output is set to
1080p. To change output
resolution, please refer to
the Software Development
Guide (provided in the SDK
installer on the SD card).
(Please note: Application
Launcher icons on LCD may
vary from picture shown here.
This is shown for reference
only.)
11
When you are ready to start
programming the
DM814x/AM387x EVM,
please remove power to the
board, remove the Linux™
SDK SD card and insert into
the included and unplugged
USB SD card reader. On a
Linux host PC running the
Ubuntu 10.04 distribution,
insert the reader into any
unused USB port and from
the START HERE folder, run
setup.htm.
8
Connect the supplied 12-V DC
power supply to the EVM (J4).
9
Turn power switch (SW1) in the
direction of the arrow shown.
7
Insert the supplied SD card into
the SD card slot, with SD card
label facing up (J15).
DM814x/AM387x EVM